当前位置：首页 > news >正文

hi3516cv610适配AIC8800D80的连接路由器记录

news 2025/3/10 21:06:12

可执行文件建议放在板子

/usr/bin/下

wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf

这里 wpa_supplicant.conf文件如下

ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
update_config=1
network={ssid="test_egg"psk="cctv1234"key_mgmt=WPA-PSK
}

接着创建

/var/run/wpa_supplicant

目录，存在则不需创建

启用wpa服务，可能报如图错误

我们将对应库，拷贝到板子 /usr/lib下即可

cp libssl.so.1.0.0 libcrypto.so.1.0.0 /usr/lib/

udhcpc之前

先关闭，eth0有线

ifconfig eth0 down

然后使用 udhcpc获取动态ip

udhcpc -f -v -i wlan0

获取动态ip，可能报如图错误

没找到这个脚本
/usr/share/udhcpc/default.script
没有这个路径则，手动创建

mkdir /usr/share/udhcpc/touch /usr/share/udhcpc/default.script

default.script内容如下

#!/bin/sh# udhcpc script for busybox
# Copyright (C) 2006 by Robert Schwebel <r.schwebel@pengutronix.de>
# Licensed under GPLv2, see file LICENSE for details.[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1# ..................
RESOLV_CONF="/etc/resolv.conf"  # DNS ..................
[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
[ -n "$subnet" ] && NETMASK="netmask $subnet"# ............... DHCP ...........................
case "$1" indeconfig)# ...... IP ..............................ip addr flush dev $interface;;renew|bound)# ......... IP ........................ip addr add $ip/$mask dev $interface $BROADCASTip route add default via $router dev $interface# ...... DNS ......[ -n "$domain" ] && echo "search $domain" > $RESOLV_CONFfor i in $dns; doecho "nameserver $i" >> $RESOLV_CONFdone;;
esacexit 0

再次执行

udhcpc -f -v -i wlan0命令