当前位置：首页 > news >正文

在DJI无人机上运行VINS-FUISON（PSDK 转 ROS）

news 2025/1/5 15:33:07

安装ceres出现以下报错，将2版本的ceres换成1版本的ceres

CMake did not find one.Could not find a package configuration file provided by "absl" with any ofthe following names:abslConfig.cmakeabsl-config.cmakeAdd the installation prefix of "absl" to CMAKE_PREFIX_PATH or set"absl_DIR" to a directory containing one of the above files.  If "absl"provides a separate development package or SDK, be sure it has beeninstalled.

衔接桥梁

dajiang SDK psdk
https://developer.dji.com/doc/payload-sdk-api-reference/cn/

psdk->ros2
https://github.com/umdlife/psdk_ros2
https://umdlife.github.io/psdk_ros2/api/library_root.html

ros2 <-> ros1
ros1_bridge

ROS 1 和 ROS 2 的环境变量不能同时写入 .bashrc 文件中，因为它们的环境变量会相互冲突=>>手动切换环境

sudo apt update
sudo apt install ros-galactic-ros1-bridge

https://blog.csdn.net/2302_80225397/article/details/141167175

标定

IMU标定

IMU标定参考港科大imu_utils框架：https://blog.csdn.net/qq_35616298/article/details/116190164

要先下载code_util编译，再下载imu_utils

code_util可能出现opencv版本号不符合的报错，更换opencv写法

注意：当工作空间里面有非ros包时，要用catkin_make_isolated，而非catkin_make

编译imu_utils出现以下报错，在mu_an.cpp加入#include <fstream>的头文件

/home/liuchengyi/imuCali_ws/src/imu_utils/src/imu_an.cpp:90:19: error: aggregate ‘std::ofstream out_t’ has incomplete type and cannot be defined90 |     std::ofstream out_t;

screen是后台运行一个终端

查看所有后台的终端

screen -ls

关闭某个名为172199.pts-1.nvidia-desktop的终端

screen -X -S 172199.pts-1.nvidia-desktop quit

远程拷贝录制bag

scp 20250103_102425.bag liuchengyi@192.168.111.171:/home/liuchengyi/Desktop

roscore端口占用

查看端口占用情况

sudo lsof -i :11311

终止占用端口的进程

sudo kill <PID>

# 1
screen
sudo sucd /home/nvidia/psdk_ros2
sh /home/nvidia/change_device_mode.sh source /opt/ros/galactic/setup.bash 
source install/setup.bash 
ros2 launch psdk_wrapper wrapper.launch.py # 2
screen 
cd /home/nvidia/psdk_ros2
source /opt/ros/galactic/setup.bash 
source install/setup.bash 
ros2 service call /wrapper/psdk_ros2/start_perception psdk_interfaces/srv/PerceptionStereoVisionSetup \"{stereo_cameras_direction: 'FRONT', start_stop: true}"DATE_STR=$(date +%Y%m%d_%H%M%S)ros2 bag record -o outputs/$DATE_STR \/wrapper/psdk_ros2/acceleration_body_raw \/wrapper/psdk_ros2/angular_rate_body_raw \/wrapper/psdk_ros2/perception_stereo_left_stream \/wrapper/psdk_ros2/perception_stereo_right_stream ## ros2 bag to ros1
rosbags-convert outputs/$DATE_STR --dst $DATE_STR.bag